Model name Prime Power Standby Power Engine Net Weight Open Version Fuel Consumption kVA kW kVA kW Type KG Dimension(L*W*H) l/hr SD-C38 38 30 41 33 4BT3.9-G 900 1780*715*1150 6.75 SD-C50 50 40 55 44 4BTA3.9-G 900 1800*720*1200 8.99 SD-C69 69 55 76 60.5 6BT5.9-G 920 2000*800*1300 12.43 SD-C100 100 80 110 88 6BT5.9-G 1050 2200*800*1300 18.07 SD-C113 113 90 124 99 6BTA5.9-G 1100 2250*830*1350 20.33 SD-C125 125 100 138 110 6BTAA5.9-G 1150 2250*830*1350 22.59 SD-C138 138 110 151 121 6CT8.3-G2 1180 2500*860*1350 24.5 SD-C175 175 140 193 154 6CTA8.3-G2 2200 2500*860*1350 31.18 SD-C200 200 160 220 176 6CTAA8.3-G2 2400 2600*880*1500 35.46 Standard Specifications OUTPUT RATINGS The following 3 phase voltages are available: 50 Hz 50 Hz 415 400 380 240 230 220 60 Hz 460 440 416 266 254 240 Other voltages are available on request. ENGINE Cummins heavy duty industrial diesel engine. Governor Electronic governing standard on all B.═ C . N and K series engines at 1500 /1800rpm. Electrical System 24V system with battery charging alternator, axial type starter motor, high capacity maintenance free lead acid starting batteries, battery rack mounted on the generator set baseframe and heavy duty interconnecting cables with terminations. Engine Filtration System Sealed paper mesh type dry air filters. Cartridge type fuel fillers and full flow lube oil filters. All filters have replaceable elements. ALTERNATOR Stamford/Marathon alternators have been carefully selected to match the overload performance of the engine and incorporate the following: Screen protected and drip proof, self exciting, self regulating brushless alternator with fully interconnected damper windings, IC06 cooling system and sealed for life bearings. PMG fitted as standard on BCP 1000 models and above. Other brand alternator are available on request. Insulation System The insulation system is Class H. All windings are impregnated in either triple dip thermo-setting moisture, oil and acid resisting polyester or vacuum impregnated with a special polyester resin. Heavy coat of anti-tracking varnish for additional protection against moisture or condensation. Electrical Characteristics Electrical design in accordance with BS5000-3,VDE0530,NEMA MG1-22/32,lEC34,CSAC22.2-100, and AS 1359 Automatic Voltage Regulator The fully sealed automatic voltage regulator maintains the voltage within the limits of ╠ 0.5% (╠1% on HC15 frame) from no load to full load including cold to hot variations at any power factor between 0.8 lagging and unity and inclusive of a speed variation of 4.0%. Nominal adjustment is by means of a trimmer incorporated in the AVR. Radio Interference Suppression is in line with the provisions of VDE Class G. CONTROL SYSTEM Baseframe mounted, control panel of fabricated steel construction with a hinged lockable door. The control panel is isolated from vibration and comprises of the following instrumentation and controls: Oil pressure gauge, water temperature gauge, battery charge ammeter, voltmeter and selector switch, frequency meter and hours counter. A manual start control module and emergency stop button are fitted as standard. Shutdown Protection Devices with Indicators for: High coolant temperature. low oil pressure and over speed. FUEL SYSTEM Fuel feed and return lines are fitted between the engine terminated at a bulkhead on the generator baseframe. COOLING RADIATOR Radiator and cooling fan complete with protection guards, designed to cool the engine at specified output, in air-on temperatures up to 45╟C(113'F ) Coolant drain valve and remote filling facility and site gauge are fitted as standard. MOUNTING ARRANGEMENT Baseframe/Fuel base tank The complete generator set is mounted as a whole on a heavy duty fabricated, welded steel baseframe. The baseframe incorporates specially designed lifting eyes for sling operation. 8h running hour capacity fuel base tank is available. Coupling The engine and alternator are directly coupled by means of an SAE flange so that there is no possibility of misalignment after prolonged use. The engine flywheel is flexibly coupled to the alternator and a full torsional analysis has been carried out to guarantee no harmful vibration will occur in the assembly. Anti-Vibration Mounts Anti-vibration mounts are supplied pre fitted between the engine/alternator combination and the baseframe for generators upto and including BCP880S. AVM'S will be supplied loose for site installation between the baseframe and floor on all other generator combinations. Safety Guards The fan, fan drive and battery charging alternator drive arc fully guarded for personnel protection. A stone guard protects the radiator core from accidental damage. GENERAL ARRANGEMENT The generator set is designed and constructed for installation in a weatherproof building. Various types of weatherproof and sound attenuated ISO container-sare available. DOCUMENT A full set of operation and maintenance manuals and circuit wiring diagrams are supplied with each generating set. FACTORY TESTS The generator set is load tested before dispatch. All protective devices, control functions are simulated and the generator and its systems checked, proved and then passed for despatch. A test certificate is provided as standard. EQUIPMENT FINISH Primer on all equipment. Final coat to manufactures standard. QUALITY STANDARDS The equipment meets the following standards: ISO3046, IEC34-1, IS08528, AS 1359, GB/T 2820 PRODUCT WARRANTY All equipment is guaranteed for a period of 12 months from date of commissio-ing or lOOOh running hour whichever occurs first. Please see SDEC Warranty Statement for a full specification of terms. Extended warranty terms are available, for details please contact your local SDEC dealer. Equipment must only be used in accordance with recommended operating practices and subject to any specified load limitations. MISCELLANEOUS Shrink wrapped for export.
